Showing 1–12 of 24 results

  • 12V 21W Small Bayonet Cap Radial Filament Lamp

    Code: OPR1221

    Pack of 10 12V 21W Small Bayonet Cap (SBC) Radial Filament Lamps.

    Read more
  • 2-12V AC/DC Powerlock

    Code: EPU0115

    The Powerlock power supply has both a lockable AC and DC outputs ranges by a simple key making it impossible for students to change the voltage. The Powerlock offers 2,4,6,8,10 and 12 in both DC and AC. Outputs may also be used simultaneously up to the rated output required. For safety, the output is also protected by a simple push button cut-out. Each unit is supplied with 2 that can be used on all Powerlock units if needed. Supplied with 2 keys.

    Read more
  • 24V 21W Small Bayonet Cap Radial Filament Lamp

    Pack of 10 24V 21W Small Bayonet Cap (SBC) Radial Filament Lamps.

    Read more
  • BERT – Battery Electrical Resistance Tester

    Code: EBR5010

    BERT is a simple way of introducing electrical resistance and resistivity to a class. It consists of a circuit board that may be drawn on using the supplied pencil. Connecting the two sides of the board together by a pencil line gives a conducting track and the LED lights. The brightness of the LED gives an indication of the resistance of the path.  Drawing the line thicker decreases the resistance, as does shortening the path. Resistances in parallel may be studied and a “volume control” simply made.  

    BERT may also be used to test various materials to see whether they are conductors or insulators. Liquids and pastes may also be tested.  The conductivity of the class may be studied as well as how a switch works.  When you are finished the pencil lines may be removed with the supplied eraser.

    Read more
  • Brass Small Bayonet Cap Batten Holders – Oval base

    Class Packs of Brass SBC (Small Bayonet Cap) round lamp holders with an oval base.

    Read more
  • Capacitance Substitution Box

    Code: ECS8100

    Our five-decade capacitance substitution box has been specifically designed for the schools market with its clear display and ease of use.

    • Unit will simulate capacitances from 100pF to 9.9999µF in 100pF steps
    • Max. voltage 50V DC
    • The required capacitance is set by a counter with the value displayed in µF, nF and pF
    • Output is via 4mm terminals with 4mm sockets
    • Housed in a sturdy ABS box
    Read more
  • Capacitance Substitution Box Class set of 15

    Code: IPC-5865-X

    Class set of 15 Capacitance Substitution Boxes. The IPC Capacitance Substitution Box (IPC-5861-X) provides the easily selection of 12 preferred value capacitors, ranging from 100pF to 0.47µF.

    The values range from: 100pF, 220pF, 470pF, 1nF, 2n2, 4n7, 10nF, 22nF, 47nF, 0.1µF, 0.22µF and 0.47µF. All the capacitors offer a maximum voltage rating of 50V (AC or DC), with actual capacitance value tolerances of ±5% to ±10%. The unit is housed in a robust ABS plastic case with rotary selector switch and a pair of 4mm connection sockets.

    Read more
  • Dual Output PSU (12VAC/12VDC)

    Code: IPC-1402-P

    This instrument (IPC-1402-P) is designed as a general purpose laboratory power supply. It has two isolated outputs which operate independently of each other.

    The AC output is selected by means of a 4-position switch on the front panel. Selected voltages are 2, 4, 6 and 12V at 4A continuously, or up to 5A for periods of 1 hour. The output is supplied via a pair of 4mm sockets on the front panel colour coded white. The output is protected from overload or short circuit by a current sensing circuit breaker mounted on the front panel.

    The DC output is smoothed and regulated and is continuously variable from 0V to 12V at currents up to 3A. Voltage ripple typically less than 50mV. The output is supplied via a pair of 4mm sockets on the front panel colour coded red (positive) and black (negative). The output is protected from short circuit or overload by an electronic regulator.

    The outputs may be used simultaneously as long as the combined load does not exceed 3A.

    Power on is indicated on the front panel by a green LED. An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish. Supplied with detachable mains lead and instructions.

    A pair of graphs showing how the output voltage of this power supply varies as the current supplied is increased is included in the instruction leaflet for this instrument.

    Read more
  • Dual Regulated PSU

    Code: IPC-0572-P

    Designed for use with electronic modules, transistors, amplifiers etc. (IPC-0572-P). where the current required is not more than 1A, this power supply provides a smoothed and regulated DC output voltage with a ripple typically less than 50mV. Output up to 15VDC positive and negative (with respect to zero) in 5 stepped ranges: 5, 6, 9, 12 and 15VDC. The outputs are from three 4mm sockets: positive, zero and negative, colour coded red, blue and black respectively. The outputs are switched by means of a rotating knob. Overload and short circuit protection is built in. An illuminated on/off switch is mounted on the rear panel adjacent to a fused appliance inlet. Housed in a robust metal case with a durable powder coated finish. 

    Read more
  • Irwin De-Mountable Transformer

    By connecting an ac power source to one of the coils and reading the voltage from the other coil transformer action (either step up or step down) may be readily demonstrated. The efficiency of the transformer may be studied –does the efficiency change if the laminate top is not firmly fixed? What happens if it is not present? Other more esoteric effects such as Magnetostriction may also be studied.

    Read more