| Description | |
A multipurpose unit that allows the user to easily calculate Planck's constant, to measure the wavelength of coloured light, demonstrate colour light transmission through colour filters and show the diffraction patterns for various wavelengths of coloured light using a range of 4 LEDs (Red, Yellow, Green and Blue) covering the light range from deep blue at 470nm to near IR at 940nm.
|
This instrument (IPC-1402-P) is designed as a general purpose laboratory power supply. It has two isolated outputs which operate independently of each other.
The AC output is selected by means of a 4-position switch on the front panel. Selected voltages are 2, 4, 6 and 12V at 4A continuously, or up to 5A for periods of 1 hour. The output is supplied via a pair of 4mm sockets on the front panel colour coded white. The output is protected from overload or short circuit by a current sensing circuit breaker mounted on the front panel.
The DC output is smoothed and regulated and is continuously variable from 0V to 12V at currents up to 3A. Voltage ripple typically less than 50mV. The output is supplied via a pair of 4mm sockets on the front panel colour coded red (positive) and black (negative). The output is protected from short circuit or overload by an electronic regulator.
The outputs may be used simultaneously as long as the combined load does not exceed 3A.
Power on is indicated on the front panel by a green LED. An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish. Supplied with detachable mains lead and instructions.
A pair of graphs showing how the output voltage of this power supply varies as the current supplied is increased is included in the instruction leaflet for this instrument.
|
Our compact Powerlock power supply now comes supplied in a 4 pack with a Gratnells deep tray for ease of storage. Offering 2, 4, 6, 8, 10, and 12 volts at currents of up to 5A. Both dc and ac outputs may be used simultaneously up to the rated output. The output is protected by a push button cut-out. The unit is 2A fused on the back panel and comes complete with a moulded mains lead and plug. Supplied with 2 keys.
| Other equipment needed is two standard 4mm plugged leads and a power supply capable of delivering 2-3 volts at 1 amp. |
Class set of 15 Capacitance Substitution Boxes. The IPC Capacitance Substitution Box (IPC-5861-X) provides the easily selection of 12 preferred value capacitors, ranging from 100pF to 0.47µF.
The values range from: 100pF, 220pF, 470pF, 1nF, 2n2, 4n7, 10nF, 22nF, 47nF, 0.1µF, 0.22µF and 0.47µF. All the capacitors offer a maximum voltage rating of 50V (AC or DC), with actual capacitance value tolerances of ±5% to ±10%. The unit is housed in a robust ABS plastic case with rotary selector switch and a pair of 4mm connection sockets.
|
| Content |
The Irwin Tapped Battery Holder holds 4 x D (R20) batteries with outputs at 1.5, 3, 4.5 and 6V. Batteries and leads not supplied. Each output has a 4mm socket. Manufactured in the UK from premium strong perspex.
| Box mounted with 5 x 4mm sockets for attachment to an ammeter or voltmeter to display measurements. Monitoring the voltage of each LED a graph of energy input as a function of light frequency emitted can be measured with an approximate value of Plank's constant calculated.
- Supplied with 500 lines/mm diffraction grating
- Designed and manufactured in the UK
|
Description: Dual Output PSU (12VAC/12VDC)
Part Number: IPC-1402-P
Electrical Supply: 220-240VAC, 50-60Hz
Dimensions: 179 x 190 x 85mm overall
Mass: 2.9kg
AC Output Voltage Range: 2, 4, 6 and 12VAC
Maximum AC Output Current: 4A (5A upto 1 hour)
DC Output Voltage Range: 0 to 12VDC
Maximum DC Output Current: 3A
|
- A robust power supply for powering laboratory experiments.
- Heavy duty toroid transformer
- Small footprint - 4 units fit in a Gratnells deep tray
- Powder coated steel case
- Switched output of 2V, 4V, 6V, 8V, 10V and 12V ac/dc controlled by a key lock
- Two keys supplied with each Powerlock. Common key profile – any key fits any Powerlock
- Total output current of 5A
- AC and DC outputs may be used simultaneously up to rated current
- Colour coded 4mm sockets
- Push button cut-out
- Manufactured in the UK
|
Our mini national grid system is a very cost-effective way of teaching the principles used by the National Grid to supply electrical power to our homes. This kit comprises two printed circuit boards and a set of "HT" leads to interconnect them and is SELV (Safety /Separated Extra Low-Voltage) classed, which means that no part of the system is at more than 50 volts - which means it is very safe and suitable for student use. The system allows the user to compare electrical transmission at low and high voltages and the results are displayed by the brightness of the two on-board MES lamps which are supplied.
|
Description : Capacitance Substitution Box          Â
Part Number : IPC-5861-X Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Electrical Supply : 50VAC/DC Maximum            Â
Dimensions : 75 x 100 x 40mm                      Â
Mass : 0.15kg                     Â
Capacitance Tolerance : ±5% to ±10%                                     Â
Electrical Connections : 4mm Sockets
|
Language:
English
