| Description |
A very popular and compact Westminster power supply that is ideal for school use in Key stage 4 and 5 physics lessons with its tough steel case protected by a tough powder coated finish that will last years of use. The unit will deliver up to 16A AC or DC through its colour coded terminal posts. This power supply is very popular for use in electromagnet experiments.
|
Solid steel Small Bayonet Cap (SBC) lamp holder with a tough powder coat paint finish and a solid brass lamp holder with 2 x 4mm electrical sockets. Ready to use supplied with a 12V 24W Lamp.
|
A compact power supply offering 2, 4, 6, 8, 10, and 12 volts at currents of up to 5A. Both dc and ac outputs may be used simultaneously up to the rated output. The output is protected by a push button cut-out. The unit is 2A fused on the back panel and comes complete with a moulded mains lead and plug. 4 units are designed to fit in a shallow Gratnell tray.
|
This instrument (IPC-1402-P) is designed as a general purpose laboratory power supply. It has two isolated outputs which operate independently of each other.
The AC output is selected by means of a 4-position switch on the front panel. Selected voltages are 2, 4, 6 and 12V at 4A continuously, or up to 5A for periods of 1 hour. The output is supplied via a pair of 4mm sockets on the front panel colour coded white. The output is protected from overload or short circuit by a current sensing circuit breaker mounted on the front panel.
The DC output is smoothed and regulated and is continuously variable from 0V to 12V at currents up to 3A. Voltage ripple typically less than 50mV. The output is supplied via a pair of 4mm sockets on the front panel colour coded red (positive) and black (negative). The output is protected from short circuit or overload by an electronic regulator.
The outputs may be used simultaneously as long as the combined load does not exceed 3A.
Power on is indicated on the front panel by a green LED. An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish. Supplied with detachable mains lead and instructions.
A pair of graphs showing how the output voltage of this power supply varies as the current supplied is increased is included in the instruction leaflet for this instrument.
|
Class Packs of Brass SBC (Small Bayonet Cap) round lamp holders with an oval base.
|
Our additional Pylons pack contains 5 thick card sheets which once cut-out produces 5 pylons to be used in conjunction with our National Grid Kit to give your pupils a clearer explanation on how the experiment works.
|
| Content |
- AC & DC Output: Voltages 1-2V
- Current 16A
- Voltage type - Fixed
- Output type - Full wave rectified DC & AC
- Mains input 230/240V AC, 50Hz
- Supplied with mains plug and lead
- Manufactured in the UK
|
Pack of 10
Solid steel Small Bayonet Cap (SBC) lamp holder with a tough powder coat paint finish and a solid brass lamp holder with 2 x 4mm electrical sockets. Ready to use supplied with a 12V 24W Lamp.
|
Specification
- Input Supply voltage 230V dc
- Supply frequency 50Hz
- Mains fuse Rear panel 2A, 20mm quick blow Mains plug 3A
- Output Voltage 2, 4, 6, 8, 10, 12V ac nominal 1, 3, 5, 7, 9, 11V full wave rectified dc nominal
- Maximum output current 5A ac or dc
- Manufactured in the UK
|
Description: Dual Output PSU (12VAC/12VDC)
Part Number: IPC-1402-P
Electrical Supply: 220-240VAC, 50-60Hz
Dimensions: 179 x 190 x 85mm overall
Mass: 2.9kg
AC Output Voltage Range: 2, 4, 6 and 12VAC
Maximum AC Output Current: 4A (5A upto 1 hour)
DC Output Voltage Range: 0 to 12VDC
Maximum DC Output Current: 3A
|
Class Packs of Brass SBC (Small Bayonet Cap) round lamp holders with an oval base.
|
Our additional Pylons pack contains 5 thick card sheets which once cut-out produces 5 pylons to be used in conjunction with our National Grid Kit to give your pupils a clearer explanation on how the experiment works.
|
Language:
English
