| Description |
Our compact Powerlock power supply now comes supplied in a 4 pack with a Gratnells deep tray for ease of storage. Offering 2, 4, 6, 8, 10, and 12 volts at currents of up to 5A. Both dc and ac outputs may be used simultaneously up to the rated output. The output is protected by a push button cut-out. The unit is 2A fused on the back panel and comes complete with a moulded mains lead and plug. Supplied with 2 keys.
|
This instrument (IPC-1402-P) is designed as a general purpose laboratory power supply. It has two isolated outputs which operate independently of each other.
The AC output is selected by means of a 4-position switch on the front panel. Selected voltages are 2, 4, 6 and 12V at 4A continuously, or up to 5A for periods of 1 hour. The output is supplied via a pair of 4mm sockets on the front panel colour coded white. The output is protected from overload or short circuit by a current sensing circuit breaker mounted on the front panel.
The DC output is smoothed and regulated and is continuously variable from 0V to 12V at currents up to 3A. Voltage ripple typically less than 50mV. The output is supplied via a pair of 4mm sockets on the front panel colour coded red (positive) and black (negative). The output is protected from short circuit or overload by an electronic regulator.
The outputs may be used simultaneously as long as the combined load does not exceed 3A.
Power on is indicated on the front panel by a green LED. An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish. Supplied with detachable mains lead and instructions.
A pair of graphs showing how the output voltage of this power supply varies as the current supplied is increased is included in the instruction leaflet for this instrument.
|
BERT is a simple way of introducing electrical resistance and resistivity to a class. It consists of a circuit board that may be drawn on using the supplied pencil. Connecting the two sides of the board together by a pencil line gives a conducting track and the LED lights. The brightness of the LED gives an indication of the resistance of the path. Drawing the line thicker decreases the resistance, as does shortening the path. Resistances in parallel may be studied and a “volume control” simply made.
BERT may also be used to test various materials to see whether they are conductors or insulators. Liquids and pastes may also be tested. The conductivity of the class may be studied as well as how a switch works. When you are finished the pencil lines may be removed with the supplied eraser.
|
The Powerlock power supply has both a lockable AC and DC outputs ranges by a simple key making it impossible for students to change the voltage. The Powerlock offers 2,4,6,8,10 and 12 in both DC and AC. Outputs may also be used simultaneously up to the rated output required. For safety, the output is also protected by a simple push button cut-out. Each unit is supplied with 2 that can be used on all Powerlock units if needed. Supplied with 2 keys.
|
Solid steel Small Bayonet Cap (SBC) lamp holder with a tough powder coat paint finish and a solid brass lamp holder with 2 x 4mm electrical sockets. Ready to use supplied with a 12V 24W Lamp.
|
Additional spare or replacement leads for our Portable Appliance Tester and Checker.
|
| Content |
- A robust power supply for powering laboratory experiments.
- Heavy duty toroid transformer
- Small footprint - 4 units fit in a Gratnells deep tray
- Powder coated steel case
- Switched output of 2V, 4V, 6V, 8V, 10V and 12V ac/dc controlled by a key lock
- Two keys supplied with each Powerlock. Common key profile – any key fits any Powerlock
- Total output current of 5A
- AC and DC outputs may be used simultaneously up to rated current
- Colour coded 4mm sockets
- Push button cut-out
- Manufactured in the UK
|
Description: Dual Output PSU (12VAC/12VDC)
Part Number: IPC-1402-P
Electrical Supply: 220-240VAC, 50-60Hz
Dimensions: 179 x 190 x 85mm overall
Mass: 2.9kg
AC Output Voltage Range: 2, 4, 6 and 12VAC
Maximum AC Output Current: 4A (5A upto 1 hour)
DC Output Voltage Range: 0 to 12VDC
Maximum DC Output Current: 3A
|
A stunningly effective way of teaching the basics of electrical resistance.
The kit comprises of:
- 1 x BERT circuit board
- 1 x PP3 battery
- 1 x 3B pencil
- 1 x crocodile clip connecting lead
- 1 x eraser
- 1 x full set of teaching notes.
|
- Output voltages AC & DC
- 2,4,6,8,10,12 voltage range in AC and DC
- Current 5A
- Voltage type - Stepped
- Output type - Full wave rectified, non-regulated
- Push button trip reset
- Mains input 230/240V AC, 50Hz
- Supplied with mains plug and lead
- Manufactured in the UK
|
Pack of 10
Solid steel Small Bayonet Cap (SBC) lamp holder with a tough powder coat paint finish and a solid brass lamp holder with 2 x 4mm electrical sockets. Ready to use supplied with a 12V 24W Lamp.
|
Additional spare or replacement leads for our Portable Appliance Tester and Checker.
|
